The assembly process is mainly based on manual operation, so the volume of glue, glue effectiveness duration, assembly precision, glue curing time influenced by manual operation. It is hard to ensure precision qualification.
High precision requirement for gap, angle, step between LED and Housing.
High precision requirement for volume of glue, and glue route to avoid the problems like glue squeeze-out, glue insufficient, glue babble.
Glue dwell and curing time lasts for 5mins, CT requirement：<=>=>
IPI uses the high-precision point laser sensor to measure the thickness of the outer casing in order to effectively control the glue route and the volume of glue,, and reduce the defects such as squeeze-out and less glue,
The dispensing machine adjusts the dispensing needle height and dispensing speed according to the thickness value, effectively achieving the glue volume control.
To ensure product step and avoid assembly gap, dislocation, glue squeeze out, glue bubble. IPI conduct deep research about design and validate for anti-press fixture. Finally, the fixture which have the function of precise orientation, location, and softy match, meet the project requirement
Scenario integrate linear module, DD motor, SCARA Robot together to achieve product automatic assembly and automatic transfer ,anti-press of less than 100 fixtures, meet CT requirement.,日本av不卡在线寓目_不卡的无码高清的av_不卡的av日本影片在线